How to Enable TPM and Secure Boot in BIOS HP for Windows 11

If you have an HP laptop and want to install or upgrade to Windows 11 but you face this problem “This PC can’t run Windows 11”. This error is mainly because of TPM 2.0 and Secure Boot. However, if you don’t know how to fix this error or how to enable TPM and Secure Boot on your HP laptops from BIOS then don’t worry! In this guide, you’re going to learn how to enable TPM and Secure Boot in BIOS HP for Windows 11.

What You Will Learn in This Guide:

1. What Is a TPM Chip?

2. What’s the Difference Between TPM 1.2 and TPM 2.0?

3. Enable TPM & Secure Boot from BIOS HP

4. How to Check if Your System Has TPM

What Is a TPM Chip?

A Trusted Platform Module (TPM) is a little chip on the motherboard of your PC that performs security-related exercises at the equipment level. It’s basically an alter safe crypto-processor equipped for finishing undertakings, for example, making encryption keys and conveying a blend of programming and equipment based verification.

An independent TPM chip is for the most part patched to the motherboard of current off-the-rack PCs. You might get one independently as an extra module for any motherboard that upholds it in case you’re building your own PC. Nonetheless, as we’ll see later, not all motherboards acknowledge TPM chips or have the fundamental association.

What’s the Difference Between TPM 1.2 and TPM 2.0?

“The TPM 1.2 standard just considers the utilization of RSA and the SHA-1 hashing calculation,” Microsoft says. “TPM 2.0 gives more crypto spryness by being more versatile concerning cryptographic calculations,” the archive proceeds. TPM 2.0 gives further developed calculations that can improve the presentation of drive marking and key age.”

Basically said, TPM 2.0 innovation is later than TPM 1.2, which has been being used since 2011. Its encryption is all the more remarkable and safe, and it can uphold more current calculations better. Also, as with most things in innovation, the more up to date the better. For more data compassionate visit ReviewGeek.

Enable TPM & Secure Boot from BIOS HP

So, here are the steps to enable both TPM and Secure Boot on HP from BIOS:

Enable TPM From BIOS on HP:

Since you’ll have to press the hotkeys before your machine begins booting up your OS, you’ll possibly have a couple of moments to react when attempting to get to your BIOS settings. You may consistently restart your PC and attempt again in the event that you miss the circumstance the first time.

  • Power on your HP laptop and then press the ESC key immediately.
  • Now, press the F10 key to Go to BIOS Setup.
  • Go to the Security tab and select TPM State.

Once you locate the option that controls your system’s TPM status, enable it by using your arrow keys.

After enabling TPM, exit your BIOS settings by pressing the F10 key and select Yes.

By pursuing the Insider program subsequent to turning on TPM 2.0, you can introduce Windows 11’s see construct. On the off chance that your framework doesn’t uphold TPM 2.0, it’s a valid justification to refresh, as most forms that aren’t over five years of age ought to incorporate the usefulness.

Enable Secure Boot From BIOS on HP:

  • Power on your HP laptop and then press the ESC key immediately.
  • Now, press the F10 key to Go to BIOS Setup.

Go to the System Configuration tab and select Boot Options using the arrow keys and press enter.

Go to the Secure Boot option and press enter.

Now, make sure it’s enabled and press enter.

  • After enabling Secure Boot, exit your BIOS settings by pressing the F10 key and select Yes.

How to Check if Your System Has TPM

On Windows 10 PCs, the TPM chip is expected to empower highlights like gadget encryption and BitLocker. The TPM chip is needed for moving up to Windows 11, and it will likewise be used to design security highlights. There are a few strategies to decide if your framework contains a TPM 2.0 chip.

Method 1. Check TPM Using tpm.msc

Step 1. Press Windows key + R to open Run.

Step 2. Now, type tpm.msc and press enter.

Stage 3. At the point when the TMP Management window shows up, you’ll have the option to check whether the TPM is introduced on your gadget. These are the necessities to check for, and they MUST be available to empower gadget encryption:

You’ll notice this under Status: Compatible TPM cannot be found if the TPM isn’t found or deactivated in the BIOS or UEFI.

Method 2. Check TPM via Device Manager

Step 1. Press Windows key + X and select Device Manager.

Step 2. Click on Security devices to expand the option.

Step 3. It will display the type of TPM chip you have. You’re fine to proceed if it reads Trusted Platform Module 2.0.

That’s it. This is how you can enable TPM and Secure Boot in HP from BIOS setup.

Read More:

remove bloatware from windows 10

How to Enable TPM and Secure Boot in BIOS HP for Windows 11

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.